Yanex-2M
UV light sensor
Efficiency of 99.99%
Speed
Mobility
3 operating modes
Germicidal dose control
Touch screen
Remote Control
Mobile pulsed xenon UV unit “Yanex-2M” is intended for urgent (within 10 minutes) indoor air and open surfaces disinfection with 99.99 % efficiency from bacteria, including their antibiotic-resistant strains (methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococci (VRE), Pseudomonas aeruginosa, Acinetobacter baumannii), C. difficile spores, MDR/XDR-TB, viruses and fungi.
The units operate in the absence of people and animals.
Pulsed UV units “Yanex-2M” are broadly used at healthcare facilities for urgent and routine disinfection in rooms of various profiles including clean rooms.
Aside from that, they are efficient:
- At living and public spaces;
- In places of mass gathering (railway stations, airports, hotels, restaurants, fitness centers etc);
- At manufacturing facilities.
A mobile pulsed UV unit “Yanex-2M” comprises two basic components:
- Compact monoblock with a handle and rubber-covered wheels for convenient transportation by one person;
- Sensor remote control in form of a mobile phone, duplicating most functions of the sensor control panel.
Sensor control panel and remote control can:
- Display contact information of the manufacturer;
- Display detailed information on existing operating modes, and set desired parameters for air and surfaces disinfection;
- Display information on the unit and the lamp;
- Store parameters of treated rooms;
- Choose a previously stored room from the list;
- Display all performed disinfection cycles;
- Send the disinfection cycles log (or sorted data) to a network or Wi-Fi printer;
- Transfer the disinfection cycles' data to a computer through special software supplied with the unit;
- Start the unit;
- Immediately stop the light generation;
- Display the time remaining till the disinfection cycle end;
- Display information on all malfunctions during the unit operation.
To prevent dust pollution and damage to the xenon lamp, it is safely positioned inside the frame. For disinfection, the lamp is automatically lifted from the frame by the actuator.
Before the unit starts generating light pulses, a sound warning to leave the room is given for safety considerations.
The unit is protected by a registered trademark of the manufacturer.
|
Parameter |
Value |
|
Disinfection range with 99.99 % efficiency for 1 cycle |
Up to 5 m/100 m2 room |
|
Light source |
Pulsed xenon ultraviolet lamp |
|
Electric power supply |
230 V, 50 Hz |
|
Power consumption |
1.5 kW at most |
|
Delay after the START button is pressed before actual light pulses generation |
18-20 sec after the START button is pressed on the control panel, or 25-28 sec - on the remote control |
|
Control |
Sensor control panel and remote control |
|
Safety conformance |
IEC 61010-1:2010 |
|
International standards compliance |
CE, ISO 9001-2015, ISO 13485:2015 |
The unit has a computer-aided control system that allows custom operating modes for disinfecting surfaces with germicidal efficiency of 99.99 % and more.
The operator only needs to input the distance to the furthest point of the surface to be treated on the control panel or remote control. At that, all the area closer than the set distance, including the air, will be disinfected with even higher efficiency.
The unit automatically calculates the time required to reach the 99.99 % efficiency at the set distance.
Guaranteed efficiency
The unit is able to disinfect the surfaces in presence of any organic load (blood, sputum, saliva, urine) without losing the 99.99 % efficiency.
Specific times of air and surfaces disinfection with 99.99% efficiency
An example of decontamination efficiency for open surfaces at 2-meters’ distance within 5 minutes (Moscow Scientific Research Institute of epidemiology and microbiology named after G.N. Gabrichevskiy, 2012). 4 log=99.99 %
Microbiology study report of Analytical Laboratory Services "Aminolab Ltd", Israel 2020. 4 log=99.99 %
Built-in sensors in real-time mode monitor:
- Germicidal flow of the pulsed lamp, as well as sustain it on the preset level;
- Unit’s operating, and correct it in case of any disturbance in the preset parameters.
The innovative mobile pulsed ultraviolet unit “Yanex-2M” by Melitta will sustain the highest disinfection quality at all times!
Request for quotation Yanex-2M
* - Fields with an asterisk are required.
